4320 Weber.floor CT-C30-F7 self-leveling primer from 2-50 mm

• Instantly binding, self-drying
• Very high strength
• Reinforced with polypropylene fibers
• High speed of work
• Pedestrian traffic possible after 2-4 hours
• Resistant to the movement of furniture on wheels
• Thanks to its low alkalinity, it works perfectly with all flooring adhesives
• For machine and manual stacking
• For indoor use
• Ecological, with very low emissions –
  EMICODE EC1 PLUS

• For making smooth and leveled floor underlays for carpets, PVC, cork, linoleum, floor panels, parquet, mosaic, ceramic and stone tiles:

– on sound insulation, e.g. from acoustic mat, mineral wool, polystyrene foam, etc. (required insulation compressibility below 3 mm) – laying thickness 25-50 mm,

– on the separating layer of foil, roofing felt, etc. – laying thickness 20-50 mm,

– on ceramic, stone, PVC, terrazzo, anhydrite, magnesite primers, ceramic tiles – laying thickness 4-50 mm,

– for sinking heating elements in systems with electric or water underfloor heating – laying thickness 25-50 mm (including at least 10 mm above the heating wires),

– on boards, OSB boards, etc. – laying thickness 10-50 mm,

– on the parquet – laying thickness 20-50 mm,

– sleepers associated with the concrete substrate, cement screeds – laying thickness 2-50 mm.

• For use inside new or renovated residential buildings and in offices, hospitals, schools, shops, cinemas, public facilities, etc.

The weber.floor 4320 primer is not recommended to be operated without the above-mentioned topcoats.

• For indoor use in apartments, offices, hospitals, shops, cinemas, public facilities, etc.
• For machine and manual stacking

Do not operate the weber.floor 4320 primer without topcoats. If the floor is not laid on the substrate within the time specified in the table, the surface should be protected (e.g. with foil) to prevent the possibility of cracks.

The temperature of the ambient and substrate during the work and for the next 7 days should be between + 10 ° C and + 25 ° C.

Relative humidity of the < substrate 95%.

Do not allow intense sunlight or heating of the poured mortar.