Flow Weber.floor CT-C20-F7 liquid screed from 10-100 mm

Cement, liquid floor screed reinforced with structural macrofibers and polypropylene fibers, in the form of a dry mixture, ready for use after mixing with water.

• Liquid screed with self-leveling properties
• Reinforced with structural fibers replacing steel mesh
• Very high fire resistance of fibers
• Full fiber resistance to alkali and corrosion
• Transmits loads even after mechanical damage caused by too much load
• Increased bending strength
• Pedestrian traffic possible after approx. 24 hours
• Very low linear shrinkage
• Perfect for water pouring or electric underfloor heating
• Water resistant – for dry, wet and wet rooms

• For making leveled floor underlays for ceramic tiles, stone, floor panels, carpets, etc.:
  – associated with cement substrate
  – on the separating layer of foil, roofing felt
  – on sound insulation
  – with underfloor water or electric heating
• For use inside new or renovated residential buildings and in offices, shops, hospitals, schools, cinemas, etc. public facilities. Under thin carpets, PVC, linoleum, the primer should be additionally smoothed, e.g. with weber.floor 4010 mortar.

• For indoor use in apartments, offices, hospitals, shops, cinemas, public facilities, etc.
• Do not operate the weber.floor RMX FLOW primer without topcoats. Under thin carpets additionally smooth, for example , weber.floor 4010.
• For manual and machine laying

The temperature of the ambient and substrate during the work and for the next 7 days should be between + 10 ° C and + 25 ° C.

Relative humidity of the < substrate 95%.

During the works and 3 days after their completion, it is recommended to slightly ventilate the rooms (avoid drafts!)

Do not allow intense sunlight, heating or overdrying of the poured mortar. Do not lay in conditions of low relative humidity of the air in the room.